top of page

PROGRAMMING & TEST MENUS FAVERO FA-07 Scoring Machine

The 6 red keys are for programming and testing the FA-07. Following is a description of the function of each key:

 

                                 

                                       Allows you to alternately enter and exit the programming function.The first step of programming is indicated with

                                      P.01.

 

                                       Allows you to go to the next programming step (P.01 → P.02 → P.03, etc.).

                                     

                                        Allows you to return to the previous programming step (P.04 → P.03 → P.02, etc.).

 

                                       

                                        When the programming parameter has more than one digit, this key allows you to select (upon rotation) one digit at a time                                            in order to modify it with the             and              keys.

 

                                       Increases/modifies the value of the parameter displayed.

 

 

                                        Decreases/modifies the value of the parameter displayed.

 

5.2 Description of programming steps Following is a description of the various programming steps, starting with P.01.

 

P.01 Language = [English, Italiano, Français, Español, Deutsch] Select the desired language with the              and             keys.

 

P.02 Chronometer = [0:00 ÷ 9:59] The current value of the chronometer is displayed. You can modify the digit underlined (by the cursor) with the keys              and              , or select the digit to be modified with the key .

 

P.03 Block Remote Control = [NO, YES] Used only in important competitions to ensure “remote control safety” and to avoid errors made from pressing a key by mistake. If “Block Remote Control = YES”, the remote control keys that normally function on their own (i.e., without the [Alt-1] key) are recognized only if the [Alt-2] key is simultaneously pressed. For example, to effectuate a 1-minute pause, instead of pressing only the [PAUSE_1_min] key, you should press the [Alt-2] + [PAUSE 1 min] keys simultaneously. Only the [START_STOP_TIME] key continues to work by itself, to allow you to immediately stop the chronometer.

 

P.04 IP = [000.000.000.000 ÷ 254.254.254.254] When a LAN connection is used, each apparatus must have a different IP address. We suggest using a number from 192.168.000.020 to 192.168.000.254, if not already in use by other devices.

 

Use the                key to select the number you wish to modify, and the keys          and              to modify it.

 

P.05 Port number = [01025 ÷ 65535] This number is used for connection to the LAN. We suggest that you leave it at 50100 and modify it only in accordance with the central management system.

 

P.06 Display contrast = [0 ÷ 9]

 

With the             and             keys you can modify the contrast of the graphic display panel for better visualization. When switching on the FA-07, if you are unable to read the display panel (it is entirely dark or entirely light due to a previous error in the contrast setting), use the remote control’s [+] and [-] keys for modifying the match by keeping pressed the [Alt-1] and [Alt-2] keys at the same time. In this way the contrast of the display panel can be modified without using the programming menu.

 

P.07 TEST number = [0 ÷ 7] With the and keys you can access the various tests specified in chapter 5.3.

 

P.08 Pause 1 min. = [Manual, Automatic] Selecting “Pause 1 min. = Automatic” is useful in 3-match competitions and launches the automatic pause of 1 minute at the end of the 3 minutes of the 1st and 2nd matches. At the end of the 1-minute pause, the subsequent match number will appear and the chronometer's 3-minute start time will load.

 

P.09 OTHER INFORMATION In this step the following non-modifiable information is displayed: • the software version installed in the FA-07, • the serial number of the apparatus.

 

PROG ENTERR EXIT BUTTON
NEXT BUTTON
PREVIOUS BUTTON
forward button
Increases/modifies button
Decreases/modifies button
Increases/modifies button
Decreases/modifies button
Increases/modifies button
Decreases/modifies button
Increases/modifies button
Decreases/modifies button
forward button
forward button
Increases/modifies button
Decreases/modifies button

Description of programming steps

Increases/modifies button
Decreases/modifies button
bottom of page